4.8-10.8V 1A/2A NIMH charger

Product Description:
| Features | Universal Fast and Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 4.8V - 10.8V , e.g. 4 to 9 cells pack |
| One charger for all types of battery packs of RC airplane, RC car and Airsoft . | |
| LED flashing red-green-red before charging in order to test the IC of the charger if ready to use. | |
| It is a very smart charger. Just plug it in and wait for the battery to get charged. Red LED indicating charging, and Green LED means fully charged | |
| Short circuit protection: No output voltage from the charger if the battery is not connected. | |
| 120-240V AC input for worldwide use. | |
| Specs & Functions | Detect battery pack voltage (from 4.8 - 10.8V) and choose proper charging voltage automatically |
| Cut-off power automatically by negative delta V IC when battery pack is fully charge. | |
| Built in IC Protecting battery from over current, short circuit & reverse polarity. | |
| Charging Current | Two current levels, 2A and 1 A, are selectable by a switch for both high capacity ( > 2100mAh) and low capacity battery pack ( < 2000mAh) |
| For battery pack between 1000 mah and 2000 mah, please use the low level switch -- charging rate: 1 A | |
| For battery pack over 2000 mAh, please use the high level switch -- charging rate: 2A | |
| Charging time | The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow: |
| Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 1A or 2 A ) | |
| Dimension | 1.5"H X 2.5"W X 5.5"L |
| Weight | 9.6 Oz (272 grams) |
